在濰坊的樓宇建設與裝修場景中，電梯門套如同建筑的 “門臉裝飾”，尺寸選擇直接影響空間美感與實用性。過寬或過窄的門套不僅破壞視覺協調性，還可能帶來安裝適配問題。究竟怎樣的尺寸才能讓電梯門套既貼合濰坊本地建筑需求，又兼具美觀與實用？答案藏在建筑標準、空間條件與設計風格的綜合考量中。

　　In the construction and decoration scenes of buildings in Weifang, elevator door frames are like the "door face decoration" of buildings, and the size selection directly affects the aesthetic and practicality of the space. A door frame that is too wide or too narrow not only damages visual coordination, but may also cause installation and adaptation issues. What size can make the elevator door frame meet the local architectural needs of Weifang while also being aesthetically pleasing and practical? The answer lies in the comprehensive consideration of building standards, spatial conditions, and design styles.

　　遵循建筑規范：把握尺寸 “基礎線”

　　Adhere to building regulations: grasp the size "foundation line"

　　電梯門套尺寸需以國家標準為基準，同時結合濰坊當地建筑設計習慣。根據通用建筑規范，電梯門洞寬度通常在 800-1200 毫米之間，高度為 2000-2200 毫米，這決定了門套的內框尺寸必須與之匹配。例如，住宅電梯門洞常見寬度為 800-900 毫米，高度 2100 毫米，門套需預留 10-20 毫米的安裝余量，確保電梯門開關順暢。濰坊當地商業建筑中，客梯門洞寬度可能達 1100-1200 毫米，高度 2200 毫米，門套設計需相應放大。此外，消防電梯等特殊用途電梯對門洞尺寸有嚴格要求，門套設計需完全貼合規范，避免因尺寸誤差影響驗收與使用安全。

　　The size of elevator door frames should be based on national standards and combined with local architectural design habits in Weifang. According to the general building code, the width of elevator door openings is usually between 800-1200 millimeters and the height is between 2000-2200 millimeters, which determines that the inner frame size of the door frame must match it. For example, the common width of residential elevator door openings is 800-900 millimeters and the height is 2100 millimeters. The door frame needs to reserve 10-20 millimeters of installation allowance to ensure smooth opening and closing of the elevator door. In local commercial buildings in Weifang, the width of the passenger elevator door opening may reach 1100-1200 millimeters and the height may be 2200 millimeters, and the door frame design needs to be enlarged accordingly. In addition, special purpose elevators such as fire elevators have strict requirements for the size of the door opening, and the door frame design must fully comply with the specifications to avoid the impact of size errors on acceptance and safe use.

　　適配空間場景：量身定制 “黃金比例”

　　Adapting to spatial scenarios: Tailored to the "golden ratio"

　　不同建筑場景對電梯門套尺寸的需求差異顯著。在濰坊的住宅小區，為營造溫馨舒適的空間感，門套寬度通常控制在 80-120 毫米，厚度 15-20 毫米，這種 “纖細” 設計既能突出電梯門的視覺中心地位，又不會因尺寸過大壓縮狹窄的電梯廳空間。例如，某老式小區改造時，將原有 150 毫米寬的笨重門套更換為 100 毫米窄邊款式，瞬間讓電梯廳顯得更加通透。

　　The demand for elevator door frame size varies significantly in different architectural scenarios. In residential communities in Weifang, in order to create a warm and comfortable sense of space, the width of the door frame is usually controlled at 80-120 millimeters and the thickness is 15-20 millimeters. This "slender" design can highlight the visual center position of the elevator door without compressing the narrow elevator hall space due to its large size. For example, during the renovation of an old residential area, the bulky door frame with a width of 150 millimeters was replaced with a narrow edge style with a width of 100 millimeters, instantly making the elevator hall appear more transparent.

　　商業場所則追求大氣與辨識度。商場、寫字樓的電梯門套寬度可放寬至 150-200 毫米，厚度 20-30 毫米，通過厚重的造型增強空間的儀式感。如濰坊某高端寫字樓采用 200 毫米寬的石材門套，搭配金屬線條裝飾，與挑高的大堂空間相得益彰。此外，若電梯廳空間寬敞，可采用雙層門套設計，外層寬 200 毫米、內層寬 150 毫米，形成層次感的同時提升視覺沖擊力。

　　Commercial places pursue atmosphere and recognition. The width of elevator door frames in shopping malls and office buildings can be relaxed to 150-200 millimeters, with a thickness of 20-30 millimeters, enhancing the sense of ceremony in the space through a thick and heavy design. A high-end office building in Weifang uses 200mm wide stone door frames, decorated with metal lines, which complement the tall lobby space. In addition, if the elevator hall space is spacious, a double-layer door frame design can be adopted, with an outer width of 200 millimeters and an inner width of 150 millimeters, forming a sense of hierarchy while enhancing visual impact.

　　兼顧材料特性：讓尺寸適配 “物理屬性”

　　Taking into account material properties: adapting dimensions to "physical properties"

　　電梯門套的材質直接影響尺寸選擇。天然石材（如大理石、花崗巖）硬度高但加工難度大，考慮到切割損耗與安裝穩固性，其寬度不宜低于 100 毫米，厚度需達 20-30 毫米，否則易出現斷裂或變形。例如，濰坊某酒店選用 25 毫米厚的芝麻白花崗巖門套，既保證了強度，又通過深灰色線條勾勒出精致輪廓。

　　The material of the elevator door frame directly affects the size selection. Natural stone materials such as marble and granite have high hardness but are difficult to process. Considering cutting losses and installation stability, their width should not be less than 100 millimeters and thickness should reach 20-30 millimeters, otherwise they are prone to fracture or deformation. For example, a hotel in Weifang uses 25mm thick sesame white granite door frames, which not only ensure strength but also outline exquisite contours through dark gray lines.

　　人造石、PVC 等新型材料柔韌性強，可實現更輕薄的設計。PVC 門套寬度 60-80 毫米、厚度 10-15 毫米即可滿足使用需求，且重量輕、安裝便捷，適合老舊小區改造。金屬材質（如不銹鋼、鋁合金）門套常采用折彎工藝，寬度 100-150 毫米，厚度 1-2 毫米，利用金屬的光澤感和現代感，為簡約風格空間增添科技感。

　　New materials such as artificial stone and PVC have strong flexibility and can achieve thinner and lighter designs. PVC door frames with a width of 60-80 millimeters and a thickness of 10-15 millimeters can meet the needs of use, and are lightweight and easy to install, suitable for the renovation of old residential areas. Metal materials such as stainless steel and aluminum alloy door frames often use bending technology, with a width of 100-150 millimeters and a thickness of 1-2 millimeters. By utilizing the luster and modernity of metal, they add a sense of technology to the minimalist style space.

　　融合設計美學：尺寸服務 “風格表達”

　　Integrating Design Aesthetics: Size Service "Style Expression"

　　電梯門套尺寸需與建筑整體風格相呼應。中式風格偏愛厚重、對稱的設計，門套寬度可達 150-200 毫米，搭配雕花或回紋裝飾，強化傳統韻味；現代簡約風格則追求極簡線條，窄邊門套（60-80 毫米）搭配啞光材質，營造干凈利落的視覺效果。濰坊某新中式商業綜合體的電梯門套，以 180 毫米寬的胡桃木材質為基底，嵌入 10 毫米寬的黃銅線條，既體現東方美學的莊重，又融入現代輕奢元素。

　　The size of the elevator door frame should match the overall style of the building. Chinese style tends to favor heavy and symmetrical designs, with door frames that can reach a width of 150-200 millimeters, complemented by carved or patterned decorations to enhance traditional charm; The modern minimalist style pursues minimalist lines, with narrow edge door frames (60-80mm) paired with matte materials to create a clean and crisp visual effect. The elevator door frame of a new Chinese style commercial complex in Weifang is made of 180mm wide walnut wood material as the base, embedded with 10mm wide brass lines, which not only reflects the solemnity of Eastern aesthetics, but also incorporates modern light luxury elements.

　　此外，門套與電梯廳墻面、地面的比例關系也需協調。若墻面采用大塊瓷磚，門套寬度可適當加寬以平衡視覺；若地面鋪設深色石材，門套可通過淺色材質或窄邊設計形成對比，避免空間顯得壓抑。

　　In addition, the proportional relationship between the door frame and the elevator hall walls and floors also needs to be coordinated. If large ceramic tiles are used on the wall, the width of the door frame can be appropriately widened to balance the visual effect; If dark colored stone is laid on the ground, the door frame can be designed with light colored materials or narrow edges to create contrast and avoid the space appearing oppressive.

　　本文由濰坊電梯門套友情奉獻.更多有關的知識請點擊:http://m.hmqczz.com我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

　　This article is a friendly contribution from Linyi Elevator Door Frame Installation For more information, please click: http://m.hmqczz.com We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message